Oil & Gas | Olympus IMS

Oil & Gas

Industries

https://adobeassets.evidentscientific.com/content/dam/video/videolibrary/videos/OIL(2)_480.mp4

Olympus Solutions for Oil & Gas

In the oil & gas industry, safety is the highest priority, and unplanned downtime is costly. A robust nondestructive testing program is important to help maintain the safety of people and the environment and keep pipelines operating efficiently.

Inspectors use X-ray fluorescence analyzers to verify that pipelines are made from the proper alloy and ultrasonic and phased array flaw detectors to check pipelines and welds for flaws and corrosion. Worker safety is paramount when it comes to inspections in challenging environments, like offshore and at height, so options like harnesses and one-handed operation make all the difference.

Resources

Corrosion Inspection Solutions

Weld Inspection Solutions

Measurement Solutions

Vanta for PMI

Tube Inspection Solutions

Bar Inspection Solutions

More Resources

Blog (42)

5 Main Advantages of Phase Coherence Imaging (PCI)

Look, Up in the Sky—Aerial Robots Autonomously Measure the Thickness of Steel

Built to Spec—Olympus Delivers on Customized Sensor Solutions

Tighten Your Tube End Quality Control with Our Automated Inspection Systems

Which Phased Array Probe Is Right for Your Total Focusing Method Inspection?

The Essential Guide to Fast Technical Cleanliness Inspections

7 Capabilities That Make Technical Cleanliness Inspections Easy for Novice Operators

5 Ways the OLYMPUS CIX100 Cleanliness Inspector Delivers Reproducible Results

Fuel Oil Analysis Using Handheld XRF: An Experiment

5 Reasons to Make the Switch to the OmniScan X3 Flaw Detector

5 Reasons Pros Will Value WeldSight Software

Achieving the Pipe (Safety) Dream

3 Ways the OmniScan X3 Flaw Detector’s Scan Plan Tool Simplifies Your Set Up

3 Tips for Accurate Small-Diameter Tubing Measurements

ASNT 2018 Wrap Up

3 Ways We Uncomplicate Corrosion Thickness Gauging Inspection Data Management

2 Challenges of High-Temperature Thickness Gauging and How to Solve Them

ECNDT 2018 Wrap Up Part 2: NDT

EX Series Flaw Detectors for Use in Explosive Atmospheres: FAQs

Ahead of the Curve: UT is Finally Flexible Enough for Pipe Elbow Inspection

4 Benefits of OmniScan Software’s Updated DGS Functionality

Inspecting Explosion-Bonded Cladded Plates

Creating a Highly Portable Flaw Detector from the Ground Up

Inspecting Stainless Steel Pipes for Corrosion without Using X-rays

Small-Diameter Pipes and How to Inspect Them

Tired of Removing Paint to Inspect Welds?

Did You Know? We Custom Manufacture Probes for Your Specific Applications

Out of this World: Olympus XRD on Mars

How the Echo-to-Echo and THRU-COAT™ Techniques Measure Up for Corrosion Inspection

On the Cutting Wedge: Using Contoured Wedges to Inspect Welds in Small-Diameter Pipes

Did You Know? Crystals Are Essential to NDT Transducers

3 Benefits of Our Stress Corrosion Cracking Solution Over Penetrant/Magnetic Testing

4 New Features of the OmniScan® MXU 4.4 Software that Help Speed-Up Inspections

Advancements in Remote Video Measurement: Get More Precision from Farther Away

3 Important Considerations when Using X-ray Fluorescence for Positive Material Identification

IPLEX NX Videoscope Wins Design Award!

Solving Austenitic/Dissimilar Weld Inspection Challenges

Get the latest on recent advances in portable phased array

Get the Most Out of Your Thickness Gauge with Instructional Videos

Five Advantages of Dual Linear Array Probes for Corrosion Inspection

Vanta Handheld XRF Analyzers Outperform the Competition

Application Notes (87)

Analyzing Oil Cleanliness in Power Generation Plants Using the CIX100 System

Detecting Rounded Shape Internal Defects in Pipes Using a Rotating Tube Inspection System

Selecting the Best Propagation Mode for a Reflector Using the AIM Modeling Tool for TFM (Total Focusing Method) Inspection

Analyzing Scaling, Corrosion, and Sludge in the Oil & Gas Supply Chain with Portable XRD

Inspecting Pipe Elbows for Flow-Accelerated Corrosion and Erosion-Corrosion Using the FlexoFORM™ Scanner

Inspecting Pipe Elbows for Pitting Corrosion and Cladding Delamination Using the FlexoFORM™ Scanner

Using the Vanta™ XRF Analyzer to Quickly and Accurately Sort Low-Magnesium Aluminum Alloys

Examining the Surface of Stainless Steel Pressure Vessels

Inspecting Small-Diameter, Austenitic Steel Pipes using a Dual Linear Array™ (DLA) Probe

Maximize Precision in Industrial Particulate Inspections

XRF – A Fast Way to Ensure Plant Safety

Maintaining Uptime in Turbine Inspections Using the IPLEX NX Videoscope

Save Time on Plant Maintenance Inspections Using Videoscopes

Evaluating the shape of a plastic bottle vent hole of drinking spout

Surface Roughness Evaluation of Memory Cards

3D Evaluation of Automobile Door Switch Embossing Using the LEXT OLS5000 Laser Microscope

Advancements in Offshore Corrosion Monitoring and Flaw Detection

A Tip to Save Time in Wind Turbine Inspection

Using the HydroFORM for External Corrosion Mapping

High-definition observation of the metal structure of materials for thermal power plant piping

Surface roughness of single-portion containers of coffee cream

Surface roughness of zipper poly bag fastener rails

Corrosion Mapping on Carbon Steel Using the RollerFORM Scanner

Vanta™ XRF Analyzer for Wear Metals in Oil

Exporting Ultrasonic Data as a .CSV File to Generate Custom Reports

Phase Shift Test for Bond Integrity

Ringdown Test for Bond Integrity

Conducting Steel Plate Surface Texture Topography Analysis with a Laser Scanning Digital Microscope

Improved Scan Plan Strategy with Compound S-Scan for Weld Inspection

Small Diameter Tube and Pipe Inspection with Time-of-Flight Diffraction (TOFD)

Eddy Current as an Alternative to Magnetic Particle Inspection for Carbon Steel Welds

Portable XRD for Bauxite: Exploration, Mining, and Extraction

Olympus Portable X-Ray Diffraction for Metallurgy

Exploring the Latest Advances in Remote Visual Inspection and 3D Stereo Measurement

Using Eddy Current Array to Detect Corrosion Pitting in Stainless Steel Tubing

Using Eddy Current to Characterize Hard Spots (Localized Hardening) in Carbon Steel Pipes

Videoscope Inspection of Heat Exchangers

Ultrasonic phased array wedge for inspecting high-temperature parts up to 150°C

Automated ultrasonic testing (AUT) of girth welds with corrosion resistant alloys (CRAs) using the Olympus PipeWIZARD

Automated Ultrasonic inspection of Girth Welds in Seamless Pipes with the Olympus PipeWIZARD

Flexible Ultrasonic Phased-Array Probe for Complex Shape Inspection

Immersion Flat with Radius (IFWR) Phased Array Probes

COOEC Launches a New Era of Quality Control for Ocean Engineering in China

Manual Phased Array Ultrasound as a Complement to Radiographic Inspections

Ultrasonic Phased Array in Lieu of Radiography

Phased Array Pipeline Zone Discrimination Inspection

Dual Matrix Array for Ultrasonic Inspection of Dissimilar Girth Welds of Large Diameter CRA-Clad Pipeline

Introduction to Time-of-Flight Diffraction (TOFD) for Weld Inspection

TOFD for Weld Root Corrosion and Erosion

Small Diameter Tube and Pipe Inspection with Phased Array

Laterally Focused Arrays-Improved Defect Length Sizing

TOFD Parallel Scanning

Ultrasonic Detection of Manufacturing Artifacts in New Pipe

In Service Inspection of ERW Welds using PA Angle Beam / WeldROVER Scanner

Measuring Manufactured Plastic Pipes

PMI Inspection and Material Verification for Hot, In-Service Testing

Process Pipe Stress Corrosion Cracking Inspection

ECA Surface Crack Detection

Stainless Steel Weld Surface Inspection with Flexible Eddy Current Array Probes

Guidelines for Automated Ultrasonic Inspection Austenitic Welds

Dual Matrix Array for the Inspection of Acoustically Noisy Welds

How Recent Handheld XRF Developments Impact Plant Based Alloy Positive Material Identification (PMI) Testing

Field Portable XRD and XRF for Shale Gas Drilling Efficiency

Non-Destructive Fingerprinting of Compounds

Automated QC / PMI Analyzer - For Fast, 100% Testing of Tubes

Automated Alloy Sorting - Stainless Steel & Specialty Alloys

Detection of Accelerated Corrosion with Handheld X-ray Fluorescence

Handheld XRF for FAC Corrosion Prediction by Cr in Carbon Steel

Oil Well Down Hole Drilling Tool Inspection

Pipeline Surface Inspection Using Eddy Current Array Technology

Crevice Corrosion - Testing the Sealing Surface of Flanges

Eddy Current Weld Inspection

Ultrasonic Testing in the Foundry Industry

Ultrasonic Testing of Aluminum and Nonferrous Castings

Measuring Nodularity in Cast Iron Using Ultrasonic Testing

Thickness Measurements of Fiberglass Plates, Pipes, and Storage Tanks

Thickness Measurements on Rubber Sheets and Coatings

High-Temperature Ultrasonic Testing

Thickness Measurement of Automotive Fuel Tanks

Detection of Hydrogen-Induced Cracking (HIC)

Corrosion Thickness Gauging with Dual Element Transducers

Measuring Internal Oxide Scale in Boiler Tubes

Measuring Metal Thickness through Paint

Measuring the Wall Thickness of Steam Boiler Tubes with EMAT Transducers

Wall Thickness Measurements of Metal Pipes and Tubes

Ultrasonic Thickness Measurements of Hot Metals

Wall Thickness Measurements for Metal Cans, Containers, and Enclosures

Case Studies (1)

Case Study: Inspecting Boiler Tube Welds Using the COBRA Ultrasonic Phased Array Solution Instead of Radiography

Videos (84)

RVI Tutorial Video Series—Inspection Management with the IPLEX™ NX Videoscope

AxSEAM™ Scanner: Long Seam Inspection Simplified

IPLEX GAir Promotion Video

Calibrate a Magna-Mike™ 8600 Thickness Gauge Using a Wire Target

Calibrate a Magna-Mike™ 8600 Thickness Gauge Using a Disk Target

Using an M1036 Transducer to Measure the Thickness of a Fabric Cord Rubber Conveyor Belt

Measure Small-Diameter Tubing Using an Immersion Transducer

Making Encoded B-scan Measurements

Set Up a Sonopen™ Transducer to Measure Small-Diameter Tubing

Introduction to WeldSight™ Software

EPOCH 6LT Rubber Boot Installation

Introduction to the Olympus 38-Link™

MagnaFORM for Stainless Steel

The HVAC and Heat Exchanger Tubing Kit using the NORTEC 600D - Remote Field Testing Demonstration

The HVAC and Heat Exchanger Tubing Kit using the NORTEC 600D - Near Field Testing Demonstration

The HVAC and Heat Exchanger Tubing Kit using the NORTEC 600D - Eddy Current Testing Demonstration

FlexoFORM Scanner - Pipe Elbow Inspection Solution Phased Array Corrosion Mapping

Vanta Technical Tutorial Series: Averaging with Dillon McDowell

Vanta Technical Tutorial Series: Getting Started with Vanta PC Software

Vanta Technical Tutorial Series: Install Hot Heel and Weld Mask Accessories

Vanta Technical Tutorial Series: Create a Custom Notes Template

Vanta Technical Tutorial Series: Export to USB or SD card

IPLEX RX - Oil clearing tip adapter can save time

IPLEX NX Compare Feature Tutorial

IPLEX NX Organize with Folders Tutorial

IPLEX NX Ghost Feature Tutorial

IPLEX NX Adding Titles Tutorial

IPLEX NX Quick Start

EPOCH 6LT Basic Operation Overview

Vanta Technical Tutorial Series: Customize a User Profile with Fleet Manager

Vanta Technical Tutorial Series: Test times for Alloy Analysis and SmartSort

Vanta Technical Tutorial Series: How to Set Up a User Profile on the Vanta

Vanta Technical Tutorial Series: How to Edit an Alloy Grade on the Vanta Analyzer

Vanta Technical Tutorial Series: How to Set Up an Export Template on the Vanta Analyzer

EPOCH 6LT Goes To Space

EPOCH 6LT Flaw Detector for Rope Access Technicians

MagnaFORM: How to Inspect Carbon Steel Welds with Eddy Current Array

Vanta - Navigating the Software

Vanta Overview Video

Vanta Quick Start Video

Vanta Ruggedness Video

Benefits of Olympus Videoscopes to Your Frequent Repeat Inspections

IPLEX NX Function Overview

IPLEX NX Promotion Video

NORTEC 600: Surface and Subsurface Inspection

NORTEC 600: Conductivity and Coatings

HydroForm Phased Array Corrosion System

Dual Matrix Array Probe

Inspecting Carbon Steel Welds with the NORTEC 600

PipeWIZARD: Why use AUT?

EPOCH 650 Product Introduction

Dual Linear Array Probe Introductory Video

L&H Industrial PA Testimonial

DELTA Element Product Introduction

IPLEX Stereo Measurement

NORTEC 600

27MG Ultrasonic Thickness Gauge Introductory Video

OmniScan MX2 Weld Inspection Workflow for Weld Inspection

OmniScan SX for Multi-Technology Weld Inspection

DELTA Labeling for PMI

IN-LINE ERW Tube & Pipe Inspection System

IPLEX RX Promotion Video

RTIS - Rotating Tube Inspection System

OLYMPUS Inspector Series - Product Overview

InHelp Promotion Video

45MG Product Introduction Video

HydroFORM Setup, Configuration and Acquisition

HydroFORM Analysis Video

HydroFORM Calibration Video

OmniScan MX2 Product Overview

38DL PLUS Product Overview

WeldROVER Scanner Demonstration

Infographics (3)

Corrosion Infographic

Measurement Infographic

Weld Infographic

Solutions (16)

Petrochemical Pipe and Oil & Gas Pipeline Inspection Solutions

Corrosion Inspection Solutions

Vanta for PMI

Measurement Solutions

Weld Inspection Solutions

Tube Inspection Solutions

Bar Inspection Solutions

OmniScan MX ECA/ECT

MapROVER

Phased Array Corrosion Solution

PipeWIZARD

TOFD Solution

Carbon Steel Small Pipes

Carbon Steel Plates and Pipes

Austenitic, Nickel, and Other Coarse Grain Alloy

DELTA Alloys and Metals Handheld XRF Analyzer

Webinars (24)

Acoustic Influence Map (AIM)—The Modeling Tool for Your TFM Inspection

The Basics of the Total Focusing Method (TFM)

Confidence You Can See—Introducing the OmniScan™ X3 PAUT/TFM Flaw Detector

Introducing WeldSight™ Software for the FOCUS PX Phased Array System

Using the FlexoFORM™ Solution to Map Corrosion in Pipe Elbows

Introducing the EPOCH 6LT Portable Flaw Detector

Advantages of Eddy Current Array over Magnetic Particle and Penetrant Testing for Inspecting the Surface of Carbon Steel Welds

Benefits of Olympus Videoscopes to Your Frequent Repeat Inspections

Phased Array Inspection of Difficult Materials

Advances in Ultrasonic and Phased Array Methods of Corrosion Detection and Assessment

Advances in Phased Array Scan Plan Design Using the Compound S-scan

Advancements in Phased Array Probes for Weld Inspection

Time-of-Flight Diffraction - An Introduction to TOFD and its role within the Non-destructive Testing Field

Diverse Uses of Advanced Ultrasonic Inspection Technologies for Pipeline Manufacturing, Construction, and Maintenance

Improved Method for the Inspection of Carbon Steel Welds using the NORTEC 600

Olympus Dual Linear Array Probe for Corrosion Imaging

PipeWIZARD - Zonal Discrimination Theory and Technology for Pipeline Inspections

Advanced Phased Array Probe Strategies for the Inspection of Austenitic and Dissimilar Metal Welds

Best Practices to Increase Production and QC/PMI for Tube/Pipe, Rod & Wire Manufacturing

New Olympus IPLEX RX/RT Videoscope, powered by PulsarPic, provides brighter and sharper images

Stress Corrosion Cracking Inspection using Eddy Current Array

OmniScan MX2 For Corrosion Mapping and Position C-scan

Webinar - Improving Small Diameter Pipe Weld Inspections with Encoded Phased Array

Webinar - The Benefits of Phased Array for Weld Inspection

Brochures (17)

FlexoFORM Pipe Elbow Inspection Solution

Phased Array Corrosion Mapping Solution

Ultrasonic HTHA Inspection Solutions Brochure

Remote Visual Inspection Solutions General Overview

Industrial Solutions Overview

EPOCH 6LT for Rope Access Inspections

EPOCH 6LT Portable Flaw Detector

Phased Array Probes and MXU Software for DGS

Inspect Farther, Faster: IPLEX™ GAir

WeldSight Software

Longitudinal Submerged Arc Weld (LSAW) Inspection System

OmniScan X3 Phased Array Flaw Detector

Automated Detection Technology™ for Phased Array

Motorized Microscope System BX61

IPLEX NX Industrial Videoscopes

Phased Array (PA) Probes and Wedges Catalog

Dual Linear Array Probe

White Papers (9)

Long Seam Weld Inspection Using the AxSEAM™ Scanner

Use of the Total Focusing Method with the Envelope Feature

Increasing the Brightness of Industrial Videoscopes

Application Considerations in Specifying High Frequency Ultrasonic Transducers

What are Industrial Videoscopes?

Introduction to Phased Array Ultrasonic Technology Applications

Automated Ultrasonic Testing for Pipeline Girth Welds

How to choose optical tip adapters for the industrial videoscopes

Defect Sizing in Pipeline Welds – What Can We Really Achieve?